Autel MaxiCharger Wallbox AC W22-C5-4G-LM Up to 32 Amp, three phase Indoor/Outdoor
The Autel MaxiCharger AC W22-C5-4G-LM Wallbox is small, smart and easy to use.
It is a versatile AC charger for homes, businesses and charging station operators.
It can be connected to the Internet via Ethernet connection, 4g/LTE or WLAN.
The display shows the total energy delivered, time, signal strength, Bluetooth connection, real-time charging progress, SOC value and other charging information such as energy, duration, current cost, power, voltage and current per phase and offers two Authorization methods - QR code or RFID card.
Autel Charge APP is used to monitor charges, display battery status and manage multiple chargers, directly from your smartphone or computer. It offers remote start, stop, schedule charging, control a smart home charger, track vehicle battery health while charging, and send notifications when charging is complete.
Easy to install and maintain with the modular design (Finish installation within 8 minutes without opening the back panel)
Product Features
Multi-layer Protection Technology
- Charger + Cloud BMS + vehicle real-time data analysis for multiple safety pre-warnings
- Safe charging mode to prevent overcharging and maintained battery stability
- Real-time monitoring of EV battery status to prevent thermal runaway
Intelligent Battery Diagnostic Technology, Longer Battery Life
- Increased EV battery life up to 20% by our industry leading AI algorithm for battery test
- Protection of EV battery via health charging mode
IP65 Protection, Fits for Extreme Weather
- Anti-salt spray, anti-dust and anti-condensation. Failure rate lowered by 80%
- Excellent design of the cooling system that makes the temperature at full load operation lower than the industry average by 10°C and the life of the whole set longer for over 8 years
- Operating temperature range at -40°C to +55°C
Charging Management with Cloud System and APP
- Remote management via Autel Charge
- Remote update and diagnosis
Autel MaxiCharger Wallbox Home Charger AC W22-C5-4G-LM
Type wall box Purpose of use For charging electric vehicles with alternating current area of application Inside & Outside Input/Output Voltage 230 V ±15%, single phase
400 V ±15%, three phasefrequency 50Hz charging power 22kW charge mode IEC 61851-1, mode 3 number of phases 1/3 User Interface Connection 4G, Bluetooth, Wi-Fi, Ethernet User Authentication App, QR code, RFID Software Update OCPP 1.6J, App, Web portal protective mechanisms Residual current circuit breaker AC 30mA, DC 6mA, protection against overcurrent, overvoltage, undervoltage, charging handle with safety lock IP and IK Rating Cable model: IP65; IK08
Socket/shutter model: IP54; IK08Safety Standards IEC/EN 61851-1, EN 62311, EN 62479, IEC/EN 62955 Certifications CE, TUV, TR 25:2016 (ICS 43.120) Note A qualified electrician is required for installation, repair or maintenance! Local installation requirements need to be met. Accesories Wall bracket, 2x screw (M6 x 50), screw (M5 x 12), 2x dowel (8mm), 2x RFID card, 2x cable sealing ring (M16 / M25), waterproof Ethernet cable gland, 2x screwdriver (T25 / T10) Dimensions Width: 186mm x Height: 336mm x Depth: 85mm Weight 3.6kg